Bus Conversions dot Com Bulletin Board
October 24, 2014, 04:00:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Trace Inverter  (Read 881 times)
Frank @ TX
Full Member
***
Offline Offline

Posts: 221




Ignore
« on: November 01, 2012, 09:43:12 AM »

Hi,
I have a Trace inverter / Charger PS 2524.
The house batteries are in a slide out.
When I pulled out the drawer I broke the battery temp sensor wire.
The break ( pull ) tore the wires from the sensor.
Does anyone have one or know what is used in the sensor.
It is molded into a rubber block.
Could be a thermocouple or a thermister or some other thing.
The inverter/charger does not work very good with out it.
Any help would be good.
Thanks
Frank
Logged
pvcces
Hero Member
*****
Offline Offline

Posts: 755





Ignore
« Reply #1 on: November 04, 2012, 07:12:59 PM »

The part you are looking for is a BTS-15 or BTS-25. there is a thermister in the block. The number indicates the length of the wire. These are readily available, so there is no need to do without the correct part.

http://www.solarpanelstore.com/solar-power.xantrex-inverters.xantrex-accessories.bts-15.info.1.html

Good luck.

Tom Caffrey
Logged

Tom Caffrey PD4106-2576
Suncatcher
Ketchikan, Alaska
Frank @ TX
Full Member
***
Offline Offline

Posts: 221




Ignore
« Reply #2 on: November 05, 2012, 07:00:35 AM »

Thanks Tom,
I was not so interested in running the inverter/charger with out this device.
Frank
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!