Bus Conversion Magazine Bulletin Board
June 22, 2018, 04:31:47 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: New ownership began September 1st 2012!  Please send any comments to info@busconversions.com
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Door seal help needed  (Read 818 times)
Gordie Allen
Sr. Member
Offline Offline

Posts: 310


« on: November 15, 2012, 11:59:32 AM »

I took the door off my 4104 to make major repairs and replace the door seals.  The PO had cobbled together foam, tape and the kitchen sink to seal the door.  Not enough, if any, of the original seals to see how they went together.  I bought all new seals from Luke, but I'm not sure how to install.  I've got to get some 3/4" flat stock to install inside the seal channel as all the original metal was trashed.

My questions are what to do with the corners, and to make sure they are oriented properly (what's inside and what's outside).  Any tips to get a good seal?  Pictures would be great.

Augusta, MI
1956 4104
DD 671
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!