Bus Conversions dot Com Bulletin Board
July 22, 2014, 08:00:33 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: The dog will not eat it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Door seal help needed  (Read 335 times)
Gordie Allen
Full Member
***
Offline Offline

Posts: 220



WWW

Ignore
« on: November 15, 2012, 11:59:32 AM »

I took the door off my 4104 to make major repairs and replace the door seals.  The PO had cobbled together foam, tape and the kitchen sink to seal the door.  Not enough, if any, of the original seals to see how they went together.  I bought all new seals from Luke, but I'm not sure how to install.  I've got to get some 3/4" flat stock to install inside the seal channel as all the original metal was trashed.

My questions are what to do with the corners, and to make sure they are oriented properly (what's inside and what's outside).  Any tips to get a good seal?  Pictures would be great.
Gordie
Logged

Augusta, MI
1956 4104
DD 671
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!