Bus Conversions dot Com Bulletin Board
December 22, 2014, 09:02:13 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 500 Members as of May 5th, 2006.  Smiley  3,499 Members as of October 21, 2012 Cheesy

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: S60 on craigslist  (Read 1610 times)
Timkar
Sr. Member
****
Offline Offline

Posts: 310





Ignore
« on: January 23, 2013, 07:51:44 AM »

Just in case someone in the NW is looking to repower.....

http://seattle.craigslist.org/oly/pts/3521591377.html
Logged

Cawston, British Columbia
bevans6
Hero Member
*****
Offline Offline

Posts: 4885


1980 MCI MC-5C




Ignore
« Reply #1 on: January 23, 2013, 08:16:46 AM »

And he's willing to trade for firewood!   Grin
Logged

1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Vintage race cars -
1978 Lola T440 Formula Ford
1972 NTM MK-4 B/SR
John316
Hero Member
*****
Offline Offline

Posts: 3309

MCI 1995 DL3, DD S60, Allison B500.




Ignore
« Reply #2 on: January 23, 2013, 11:47:38 AM »

Can't go wrong. It was just rebuilt. No problem Grin

If I lived closer I might actually trade him for it, just to play with it.
Logged

MCI 1995 DL3. DD S60 with a Allison B500.
expressbus
Full Member
***
Offline Offline

Posts: 162





Ignore
« Reply #3 on: January 23, 2013, 01:27:35 PM »

Friend did a engine swap to an Eagle. Detroit was called and the friend was told no way was Detroit going to give assistance to someone building a hot rod bus that is 50 years old - click. That was the sound of the phone being hung up - fast too!

Good luck with Detroit. The friend had to make up his own custom harness.
Logged

Will Garner, Jr
Southern Pines, NC
1991 Prevost Conversion by Country Coach
hargreaves
1987 MCI 102A3
Sr. Member
****
Offline Offline

Posts: 299





Ignore
« Reply #4 on: January 23, 2013, 02:39:42 PM »

Making a harness is easy  If he as both ends all you need is about 40 feet each of about 32 different colored wires  some connectors solder and shrink tubeing.  Cheers Gerry
Logged

now as of Feb 2012 series 50 B400  . Sunshine Coast British Columbia
luvrbus
Hero Member
*****
Offline Offline

Posts: 13135




Ignore
« Reply #5 on: January 23, 2013, 03:58:56 PM »

Eagles came with series 60 in the late 90' only problem DD has is they were never certified with a drop box but getting help is not a problem Williams will give you phone numbers for assistance

good luck 
Logged

Life is short drink the good wine first
twostick
Newbie
*
Offline Offline

Posts: 34




Ignore
« Reply #6 on: January 23, 2013, 07:14:06 PM »

These guys make retro-fit harnesses for Cat Cummins and Detroit engines.

http://mawkindustries.com/

Kevin
Logged
belfert
Hero Member
*****
Offline Offline

Posts: 5480




Ignore
« Reply #7 on: January 24, 2013, 08:21:43 AM »

i think the required wiring harness is going to be pretty low on the list of issues when stuffing a Series 60 into a bus.  You have to deal with motor mounts, air intake piping, transmission interface, and a whole host of other issues.

Personally, I don't think I would buy that engine unless you want to spend a lot of time getting it ready to go into your bus.  It looks a little rough, but of course a fresh coat of spray paint can also be hiding a whole bunch of issues too.
« Last Edit: January 24, 2013, 03:59:39 PM by belfert » Logged

Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN
TomC
Hero Member
*****
Offline Offline

Posts: 6982





Ignore
« Reply #8 on: January 24, 2013, 11:42:32 AM »

Would be better just to buy the complete wrecked truck. When you buy a cut out like this, who knows what you're missing. I don't see the gas pedal? Then you'll see exactly how everything is supposed to be hooked up.
One of the main things you have to change on a Series 60 is the oil pan. The truck oil pan is just to deep for a bus. Detroit makes a shallow pan for buses. It is a good idea also to change from the one piece plastic valve cover to the two piece aluminum. It makes for easier removing of the valve cover once the engine is in place. Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
dickegler
Full Member
***
Offline Offline

Posts: 113





Ignore
« Reply #9 on: January 24, 2013, 03:22:31 PM »

Hi all,

will any of the marine oil pans work in a bus application?  I know at least they are shallow.

Thanks 
Dick
Logged

dick egler  atlanta, in  92 prevost/beaver conversion
Ed Brenner
Sr. Member
****
Offline Offline

Posts: 253





Ignore
« Reply #10 on: January 24, 2013, 05:55:36 PM »

By the time you buy the oil pan, pickup tube and brackets, oil pan gasket and special pan bolts
you will have eaten up a $1000 bill pretty good.
I just did it , starting the re-power in my Eagle with a 60 series. The engine is the easy part!
That ain't a bad price for an engine, turbo and ECM cost you that. I could use it for spare parts if closer.
ED
Logged

Ed Brenner
77 Eagle 05  Murrells inlet, SC
 " While We're At It " A Busnut's most costly Phrase !!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!