PCC Series cartridges contain foodgrade
hexametaphosphate that
dissolves slowly in water to inhibit
scale and rust build-up.
This type of treatment is
recommended for use with ice
machines, coffee and vending
machines, food service equipment,
water heaters, air conditioning
equipment and many other types of
water processing equipment.
To best meet your needs, cartridges
are available in four feeder sizes and
all materials are FDA grade.
They are effective for treating scale,
corrosion and iron problems for up
to six months at various flow rates
and feed concentrations.
The PCC212 and PCC218
cartridges are designed to fit #10
Standard or Slim Lineฎ filter
housings.
The PCC106 is an insert element
that is placed in the center core of
the cartridge. It is designed for use
with standard 10" and 20" radial
flow, sediment and carbon block
filter cartridges.
PCC SERIES HEXAMETAPHOSPHATE
CRYSTAL CARTRIDGES
Effective for treating scale, corrosion and iron problems
Ideal for a variety of food service equipment, as well as other types of water processing equipment
PCC1 PCC212
PCC218
PCC106
PCC SERIES
CRYSTAL CARTRIDGES
502 Indiana Avenue P.O. Box 1047 Sheboygan, Wisconsin 53082-1047
Customer Service: 800-645-0267 Fax: 888-203-7361
supportspecialist@pentekfiltration.comInternational: 920-457-9435 Fax: 920-457-2417
international@pentekfiltration.comฉ 2004 Pentair Water Treatment
www.pentekfiltration.com Printed in U.S.A. 01/04 310085
PCC SERIES
Hexametaphosphate Crystal Cartridges
CAUTION: Eye irritant. Contains sodium calcium hexametaphosphate. Avoid contact with eyes. In case of eye contact, flush with water for 15 minutes, get medical attention.
Keep out of reach of children.
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
NOTE: PCC212 and PCC218 cartridges are not recommended for main line water applications with flow rates exceeding 3.0 gpm (11.4 lpm).
NOTE: With steamers, the water should be flushed daily.
CAUTION: Do not use this cartridge on water that will be carbonated.
Materials of Construction
Filter Media Food Grade Polyphosphate
Shell Polypropylene
Post-filter Polypropylene (PCC212 & 218)
Gasket Buna-N (PCC212 & 218)
Temperature Rating 40ฐF to 100ฐF (4.4ฐ C to 37.8ฐC)
Cartridge Specifications and Performance Data
Maximum Initial ΔP (psi)
Model Dimensions @ Flow Rate (gpm)
PCC1 2-7/8" x 9-5/8" Up to 5 gpm
(73 mm x 244 mm) (19 L/min)
PCC106 1-1/16" x 5-7/16" 1 to 1.5 gpm
(27 mm x 138 mm) (4 to 6 L/min)
(for insertion in center core of open core cartridges)
PCC212 2-5/8" x 9-3/4" 1 to 1.5 gpm
(67 mm x 248 mm) (4 to 6 L/min)
PCC218 2-5/8" x 9-3/4" 1.5 to 2.5 gpm
(67 mm x 248 mm) (6 to 10 L/min)
SCALE: Hardness particles are kept separated so they cannot
precipitate and form deposits when heated. Maximum hardness
15 gpg.
CORROSION: A protective coating is formed on all metal
surfaces, safeguarding against acidity/alkalinity, hardness,
chloride and other factors which effect the corrosion of water
equipment and pipes. pH range 6.5 9.0.
IRON: Dissolved iron, up to 1 ppm, is kept suspended in
solution (sequestered), preventing dissolved iron from
precipitating, which would cause staining and discoloration.