Bus Conversions dot Com Bulletin Board
July 23, 2014, 07:17:26 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It will not be stolen by your mailman or your neighbor who also may be into buses.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: sizes & lengths  (Read 1890 times)
akroyaleagle
Sr. Member
****
Offline Offline

Posts: 429





Ignore
« Reply #15 on: February 17, 2013, 06:44:10 AM »

Are these the figures you are looking for?

Turning Radius

MCI 40-foot 7,8,9: Outside body corner, LH & RH = 50' '7" Outside tire, LH & RH = 47' 6"

Eagle 1,5,10: Outside body corner, LH & RH = 44' 3" Outside tire, LH & RH = 41' 0"

MC-5 a,b,c: Outside body corner, LH & RH = 43' 6" Outside tire, LH & RH = 40' 6"

GM 4106 specs just slightly tighter than the MC-5s, at 42' and 38' 6" respectively.

As you can see, the turning radius of the 35' MC-5 is almost identical to the 40' Eagles.
Logged

Joe Laird
'78 Eagle
Huron, South Dakota
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!