PCC Series cartridges contain foodgrade
dissolves slowly in water to inhibit
scale and rust build-up.
This type of treatment is
recommended for use with ice
machines, coffee and vending
machines, food service equipment,
water heaters, air conditioning
equipment and many other types of
water processing equipment.
To best meet your needs, cartridges
are available in four feeder sizes and
all materials are FDA grade.
They are effective for treating scale,
corrosion and iron problems for up
to six months at various flow rates
and feed concentrations.
The PCC212 and PCC218
cartridges are designed to fit #10
Standard or Slim Line® filter
The PCC106 is an insert element
that is placed in the center core of
the cartridge. It is designed for use
with standard 10" and 20" radial
flow, sediment and carbon block
PCC SERIES HEXAMETAPHOSPHATE
• Effective for treating scale, corrosion and iron problems
• Ideal for a variety of food service equipment, as well as other types of water processing equipment
502 Indiana Avenue • P.O. Box 1047 • Sheboygan, Wisconsin 53082-1047
Customer Service: 800-645-0267 • Fax: 888-203-7361 • email@example.com
International: 920-457-9435 • Fax: 920-457-2417 • firstname.lastname@example.org
© 2004 Pentair Water Treatment www.pentekfiltration.com
Printed in U.S.A. 01/04 310085
Hexametaphosphate Crystal Cartridges
CAUTION: Eye irritant. Contains sodium calcium hexametaphosphate. Avoid contact with eyes. In case of eye contact, flush with water for 15 minutes, get medical attention.
Keep out of reach of children.
WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
NOTE: PCC212 and PCC218 cartridges are not recommended for main line water applications with flow rates exceeding 3.0 gpm (11.4 lpm).
NOTE: With steamers, the water should be flushed daily.
CAUTION: Do not use this cartridge on water that will be carbonated.
Materials of Construction
• Filter Media Food Grade Polyphosphate
• Shell Polypropylene
• Post-filter Polypropylene (PCC212 & 218)
• Gasket Buna-N (PCC212 & 218)
• Temperature Rating 40°F to 100°F (4.4° C to 37.8°C)
Cartridge Specifications and Performance Data
Maximum Initial ΔP (psi)
Model Dimensions @ Flow Rate (gpm)
PCC1 2-7/8" x 9-5/8" Up to 5 gpm
(73 mm x 244 mm) (19 L/min)
PCC106 1-1/16" x 5-7/16" 1 to 1.5 gpm
(27 mm x 138 mm) (4 to 6 L/min)
(for insertion in center core of open core cartridges)
PCC212 2-5/8" x 9-3/4" 1 to 1.5 gpm
(67 mm x 248 mm) (4 to 6 L/min)
PCC218 2-5/8" x 9-3/4" 1.5 to 2.5 gpm
(67 mm x 248 mm) (6 to 10 L/min)
SCALE: Hardness particles are kept separated so they cannot
precipitate and form deposits when heated. Maximum hardness
CORROSION: A protective coating is formed on all metal
surfaces, safeguarding against acidity/alkalinity, hardness,
chloride and other factors which effect the corrosion of water
equipment and pipes. pH range 6.5 – 9.0.
IRON: Dissolved iron, up to 1 ppm, is kept suspended in
solution (sequestered), preventing dissolved iron from
precipitating, which would cause staining and discoloration.