Bus Conversions dot Com Bulletin Board
August 20, 2014, 11:16:05 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: Ladder position for bunk beds  (Read 1581 times)
Seangie
www.herdofturtles.org
Hero Member
*****
Offline Offline

Posts: 827


And We're Off... Like a Herd of Turtles


WWW

Ignore
« Reply #15 on: February 18, 2013, 04:12:53 PM »

What is the wall thickness of the tubbing?

Sam - we used 3/16 mild steel tubing.

Quote
Sean, why did you have to weld anything in the bus?  The first picture you posted seems to show the bunk frame completely welded up outside

Brian - Our door in the bus only has about a 24" opening.  It was easier to carry them into the bus in 2 pieces.  The picture of the free standing frame outside the bus is unwelded with the corner L brackets holding the 2 parts together. He is welding the corner brackets to the one side not welding the frame together.  We are using the other half of the frame to ensure the correct placement of brackets for a tight fit.

-Sean

www.herdofturtles.org
1984 Eagle Model 10S
Logged

'Cause you know we,
we live in a van (Eagle 10 Suburban)
Driving through the night
To that old promised land'
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!