Scott looks like your set up nice and warm .Did you skirt the bottom then add snow!
Do you have a problem with condensation inside or do the cube heaters solve this
I did not skirt the bottom but I do recommend it. I used the snow this time around to skirt it a little. I have a cube heater in each of my two plumbing bays set to its lowest setting. We had a condensation problem on the windshield glass as well as the screw heads in the ceiling. On a warmer day, we dried the screw heads and put several layers of silicone caulk on them. Problem solved. On the windshield, we applied heat shrink film with a small air gap in between. Once again, problem solved. We now have zero condensation on our windshield and can enjoy a crystal clear view.
Sent from iPhone via Tapatalk