Bus Conversions dot Com Bulletin Board
July 23, 2014, 12:56:06 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It arrives at least two weeks before the First Class printed magazine.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Engine Heater On  (Read 709 times)
saddleup
Sr. Member
****
Offline Offline

Posts: 358





Ignore
« on: March 15, 2013, 06:23:14 AM »

setting here in Bernardo, NM, waiting for it to warm up a little 25 degees here, missing Yuma, got a job starting SE of Cheyenne monday, be lucky if this is coldest for a while.
Matt
Logged

Box Elder,S.D.  Battle Mountain,NV


1974 Eagle 05 On the road, to Somewhere
luvrbus
Hero Member
*****
Offline Offline

Posts: 12059




Ignore
« Reply #1 on: March 15, 2013, 06:27:37 AM »

88 degrees here yesterday Matt what in the world are you thinking LOL you better take cover there are some big ones headed for the west for the next 10 to 14 days
« Last Edit: March 15, 2013, 06:32:19 AM by luvrbus » Logged

Live each day like it was your last,one day it will be
saddleup
Sr. Member
****
Offline Offline

Posts: 358





Ignore
« Reply #2 on: March 15, 2013, 06:35:07 AM »

Clifford, I am thinking greed,lol, 61 miles poly gathering system
Logged

Box Elder,S.D.  Battle Mountain,NV


1974 Eagle 05 On the road, to Somewhere
luvrbus
Hero Member
*****
Offline Offline

Posts: 12059




Ignore
« Reply #3 on: March 15, 2013, 06:37:58 AM »

Call me after Memorial Day and I'll come help you
Logged

Live each day like it was your last,one day it will be
rusty
Sr. Member
****
Offline Offline

Posts: 347





Ignore
« Reply #4 on: March 15, 2013, 06:47:18 AM »

Matt, You did not go far enough North. We are 60 miles south of Cheyenne and it was 68 degrees yesterday and it will be 73 today.  Are you going to work in the oil patch in Weld county? Stop by on your way through.

Wayne
Logged
Ed Hackenbruch
Hero Member
*****
Offline Offline

Posts: 2357




Ignore
« Reply #5 on: March 15, 2013, 07:08:43 AM »

 96 in Yuma yesterday, supposed to be about the same today.
Logged

1968 MCI 5A with 8V71 and Allison MT644 transmission.  Western USA
saddleup
Sr. Member
****
Offline Offline

Posts: 358





Ignore
« Reply #6 on: March 15, 2013, 05:35:37 PM »

Wayne, alls i have heard is its somewhere out of Hereford , Grover, only names i heard sofar, will take a tour sunday, i going to stay at the WYO rv park east of Cheyenne.
We are at koa Colorado City studying the map,looks like 470 toll road to 85 north would be good, what you think?
Logged

Box Elder,S.D.  Battle Mountain,NV


1974 Eagle 05 On the road, to Somewhere
saddleup
Sr. Member
****
Offline Offline

Posts: 358





Ignore
« Reply #7 on: March 15, 2013, 08:44:04 PM »

Call me after Memorial Day and I'll come help you

Clifford, Why wait? bet the spring weather in eastern Wyoming be good for ya.
Logged

Box Elder,S.D.  Battle Mountain,NV


1974 Eagle 05 On the road, to Somewhere
rusty
Sr. Member
****
Offline Offline

Posts: 347





Ignore
« Reply #8 on: March 16, 2013, 07:40:30 AM »

Matt, That toll road is very expensive I think there are 5 or 6 stops at about 2 or 2.50 an axle. I have not taken the bus around it lately but 4 or 5 years ago it cost me 47 bucks and the rates have gone up. Just say on I 25 pick a lane 2 in from either side and you will be OK. About 1/2 of the road through denver is new and easy to drive. There is some construction and a couple of sections that tighten up in width and have some lane changes but slow down and all will be well. If you don't want to go through town you can use C470 on the west side it is not a toll road but will take you out of the way a bit. ( C470 TO I70 TO I76/270 to I 25 ) That one is usually as busy as going through town. Yes that is in Weld County not much up there but Grass land Cows and Oil/Gas. Is a good place to work no one to bother you.

Wayne
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!