Bus Conversion Magazine Bulletin Board
May 27, 2018, 01:00:19 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at (657) 221-0432 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Checking fluid in VS2-8  (Read 871 times)
Offline Offline

Posts: 42

« on: March 29, 2013, 05:19:35 PM »

What is the proper way to check this fluid.  It has Rotella in it - is that a good choice?  I run Rotella 40 wt in the motor.

Rick "Adventure" Reese

New owner - 1969 GMC T8H5305a-020
This is the bus Sandra Bullock did NOT trash in the movie, Speed
Full Member
Offline Offline

Posts: 111

the grey ghost,1971 GMC 5305A

« Reply #1 on: April 26, 2013, 10:20:01 AM »

I have the same tranny, researched before i changed the fluid most of the info i found say's to use delco ATF not motor oil and thats what it had in it when i drained it/ Mine has two skinner valves mounted on the top end of tranny, not sure what they do yet have only driven her once just wondering how many yours has and if you know their purpose?

Hero Member
Offline Offline

Posts: 1257

« Reply #2 on: April 26, 2013, 12:46:55 PM »

 The skinner valves control the shifter (probably an air unit).>>>Dan   And it should have ATF in it, but 10 weight oil will work well also

 EX 4106 (presently SOB)
Cedar City, Ut.
 72 VW Baja towed
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!