Bus Conversions dot Com Bulletin Board
July 28, 2014, 05:33:41 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It takes up much less space in your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: MCI 102A-3 Radiator Compartment Door Repair  (Read 396 times)
mlh1936
Jr. Member
**
Offline Offline

Posts: 94


Graphics By Turbo Images




Ignore
« on: April 04, 2013, 08:47:29 PM »

The hinge pin on my left radiator compartment door has severely rusted and broken in several places. It appears impossible to pull out,punch out or drill out the hinge pin. My first thought was to just pull off the hinge and install a new one. However it appears to me that the hinge has been spot welded(?) to the door. Any thoughts on how to replace the hinge without demolishing the door? Thanks.
Mal
Logged

1987 MCI 102A-3, 8V92, HT-740 conversion in progress.
Acausey
Newbie
*
Offline Offline

Posts: 21





Ignore
« Reply #1 on: April 05, 2013, 06:47:26 AM »

You might be able to drill out the spot welds and then rivet or re-weld the new one on.  You might also have some luck grinding or cutting the welds off with a roto tool.  I bet if you post a couple of pictures, some of the pros here will have some good advice!


~ Andy
Logged

The Causey Family Cruiser
'87 MCI MC9
Wylie, TX (Dallas area)
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!