Bus Conversions dot Com Bulletin Board
April 23, 2014, 05:13:32 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It takes up much less space in your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: MC-8 part numbers  (Read 379 times)
tekebird
Hero Member
*****
Offline Offline

Posts: 2262





Ignore
« on: April 26, 2013, 01:15:15 PM »

Anyone have a parts book? and would not mind looking up the #'s for tie rod ends and draglink/drag link ends?

thanks in advance
Logged
John316
Hero Member
*****
Offline Offline

Posts: 3203

MCI 1995 DL3, DD S60, Allison B500.




Ignore
« Reply #1 on: April 26, 2013, 01:31:29 PM »

I don't have an 8 book. However, you might try MCI tech support. They should have all the books and are usually very helpful.

FWIW

John
Logged

MCI 1995 DL3. DD S60 with a Allison B500.
tekebird
Hero Member
*****
Offline Offline

Posts: 2262





Ignore
« Reply #2 on: April 26, 2013, 03:18:34 PM »

already went that route...no Joy.

MCI is purging a lot of old stuff.

The part is a  vendor part and I am trying to track down the cross reference numbers so we can go direct to  source but need the MCI number to start.......my manual went with the bus...and is not handy at this time
Logged
MC8Mike
Newbie
*
Offline Offline

Posts: 34





Ignore
« Reply #3 on: April 26, 2013, 04:20:17 PM »

I show the drag link end at axle as a 11r-4-4, pitman arm end is a 11r-4-5
cross tube ends are lh 1c-2-62 and the rh end is 1c-2-63
Logged

1973 MC8 in progress but we're going to use it this year!
Fallon, Nevada
luvrbus
Hero Member
*****
Online Online

Posts: 11543




Ignore
« Reply #4 on: April 26, 2013, 04:49:12 PM »

Most of MCI front end parts are made by Euclid the king pins,tie rods and drag links,Dayton,R&S and Moog are your larger aftermarket suppliers for those parts
Logged

Live each day like it was your last,one day it will be
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!