Bus Conversions dot Com Bulletin Board
November 22, 2014, 10:07:12 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It arrives at least two weeks before the First Class printed magazine.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: part number for Stemco oil hub window?  (Read 635 times)
bevans6
Hero Member
*****
Offline Offline

Posts: 4818


1980 MCI MC-5C




Ignore
« on: May 22, 2013, 08:28:50 AM »

I broke one of the sight windows on the oil hubs on my MC-5C.  Stemco was totally useless at getting a part number for me.  Does anyone know the part number to order for that little sucker?  It is 2.75" in diameter and .190" thick at the edge, with a standard fill plug hole in the middle.

Thanks, Brian
Logged

1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Vintage race cars -
1978 Lola T440 Formula Ford
1972 NTM MK-4 B/SR
robertglines1
steam nut
Hero Member
*****
Offline Offline

Posts: 4037





Ignore
« Reply #1 on: May 22, 2013, 08:50:04 AM »

Brian; I bought two new hub covers complete last week at truck pro for around $10 each for the 98 XLE: sort of shocked at low price. Included new gasket's  Bob
Logged

Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana
luvrbus
Hero Member
*****
Offline Offline

Posts: 12908




Ignore
« Reply #2 on: May 22, 2013, 08:56:14 AM »

www.ryderfleetproducts.com I don't think they service the plastic part only the plug so many different models to choose from I would replace both, the plastic get hard and brittle sooner or later the other side will break as Bob said they are cheap at truck supply places
« Last Edit: May 22, 2013, 10:32:31 AM by luvrbus » Logged

Life is short drink the good wine first
bevans6
Hero Member
*****
Offline Offline

Posts: 4818


1980 MCI MC-5C




Ignore
« Reply #3 on: May 22, 2013, 10:03:15 AM »

Well, I got somewhere.  I found a Stemco PDF with dimensions on it, and the MCI front hub dimensions are 6 on 6" bolt circle, 3/8" bolts, and the Stemco part number is 343-4080, which crosses to the MCI part number 15C240 and 15002400.  Around $35 at Ryder, thanks for the link.  The window kit is 359-5999 for the 2.75" window, which is what the hubs I already have need.  So I will just need to source a window kit, and that is a lot easier with a part number! 

Brian
Logged

1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Vintage race cars -
1978 Lola T440 Formula Ford
1972 NTM MK-4 B/SR
Zeroclearance
Hero Member
*****
Offline Offline

Posts: 523





Ignore
« Reply #4 on: May 22, 2013, 10:18:59 AM »

For those that have a later Prevost and MCI.

The Stemco window that measures roughly 3.60"   The repair kit is 359-5912   The complete replacement hub cap seal assy is part number 343-4249..

Clifford these are the correct ones for your 2002/2204 H3..  Fleetpride has them cheaper than Ryder..  I think that I paid $27 for the complete unit.
Logged
Zeroclearance
Hero Member
*****
Offline Offline

Posts: 523





Ignore
« Reply #5 on: May 22, 2013, 10:20:25 AM »

FYI, the RED plug is part number 359-5915  For those that have weathered plugs.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!