Bus Conversions dot Com Bulletin Board
October 21, 2014, 06:31:33 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Early GM's Maintenance Tip  (Read 329 times)
Boomer
Hero Member
*****
Offline Offline

Posts: 680





Ignore
« on: June 18, 2013, 07:38:04 PM »

If you have an early GM (4104 or older) with the hand brake assembly still operational, here's a tip.  If your shield assembly that goes over the parking brake drum is missing (how many know that there ever was one there?) I highly recommend that you install one.  Most have long since been discarded but there is a good reason GM put them on there.  Nuts, bolts, rocks, whatever can get between the shoes and drum and really cause a problem (don't ask me how I know) and even start a fire.  Here are before and after pictures of one I installed on my Silverside, GM part no. 2229479.  Good luck finding one, but it's possible to make one if you're handy.  HTH

Mark
Logged

'81 Eagle 15/45
'47 GM PD3751-438
'65 Crown Atomic
Vancouver, WA USA
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!