Bus Conversion Magazine Bulletin Board
June 19, 2018, 05:38:14 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not be stolen by your mailman or your neighbor who also may be into buses.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
Author Topic: 24V marker lights?  (Read 7483 times)
Sr. Member
Offline Offline

Posts: 267

« Reply #15 on: July 16, 2013, 11:11:55 PM »

I removed the oem units and connected the wires on the new lights put 2 screws in and presto very bright nice looking lights.  Grin Grin

1976 MCI 8
8" roof raise
Hero Member
Offline Offline

Posts: 5988

1980 MCI MC-5C

« Reply #16 on: July 17, 2013, 10:11:42 AM »

I installed my Micro Nova LED bulb replacement today, it worked fine.  I needed to use a little adhesive on the gasket  as it was just a little too big to be a push fit.  My problem was I wanted to retain the existing assemblies and just replace the bulb socket, and that worked out fine.


1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Tatamagouche, Nova Scotia
Offline Offline

Posts: 33

« Reply #17 on: July 20, 2013, 09:41:43 AM »

Had just put in the wrong (12V) bulbs. Got the 24V @ Grainger, NOT cheap. Switching to LED's & a 12V system...

1982 Prevost Champion/Marathon under construction...
Pages: 1 [2]  All   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!