Bus Conversions dot Com Bulletin Board
October 24, 2014, 11:02:12 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It can be read on any computer, iPad, smart phone, or compatible device.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: Rubber "Fender Skirts"  (Read 2402 times)
farmallrick
Newbie
*
Offline Offline

Posts: 6





Ignore
« on: August 17, 2013, 09:17:20 PM »

Where can I get the "Rubber Fender extentions/skirts" that go above the tires on my 1978 MCI? is that a dealer Item only and about how much are they I need all four for the rear of coach
Logged
wildbob24
Hero Member
*****
Offline Offline

Posts: 539





Ignore
« Reply #1 on: August 17, 2013, 10:27:20 PM »

I was going to ask which model coach you have, but since you need 4 fenders, it must be an MC8.

You should check with Luke at US Coach, a long time supporter of this nutty hobby: 1-888-262-2434. He may have what you need.

The part number for the LH drive & RH tag is 3R-23-14.
The part number for the RH drive & LH tag is 3R-23-15.

You'll need 2 of each and MCI is showing them in stock for $100.20 each. They can be reached at 1-800-323-1238

Bob





Logged

P8M4905A-1308, 8V71 w/V730
Custom Coach Conversion
Duluth, GA
lostagain
Hero Member
*****
Offline Offline

Posts: 1567


MC5C




Ignore
« Reply #2 on: August 18, 2013, 06:43:42 AM »

They look nice: maybe. They keep the wheels from spaying the side of the bus: maybe. But they sure make removing the wheels difficult. I have been thinking about removing them.

JC
Logged

JC
Invermere, BC
1977 MC5C, 6V92/HT740
bevans6
Hero Member
*****
Offline Offline

Posts: 4762


1980 MCI MC-5C




Ignore
« Reply #3 on: August 18, 2013, 09:52:20 AM »

It's just a two jack process to remove the wheels easily with the rubber skirts, which I think look great and really help to keep things neat and tidy.  The first jack lifts at the body jacking point to lift the bus up in the air, then the second jack lifts the wheel so the tire is just off the ground.  With the clearance from having the bus body up you have easy clearance to pull the wheels off.

Brian
Logged

1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Vintage race cars -
1978 Lola T440 Formula Ford
1972 NTM MK-4 B/SR
lostagain
Hero Member
*****
Offline Offline

Posts: 1567


MC5C




Ignore
« Reply #4 on: August 18, 2013, 11:41:25 AM »

Part of my problem is that my tires are 11R24.5, larger than stock. Even with lifting the bus up, the tire is larger than the width of the skirt opening. I fight with it every winter to replace the outer duals after my brakes maintenance. The front wheels aren't as bad because they are a couple of inches farther inside the body with more wiggle room.

I had forgotten that you guys probably have 22.5s.

JC
Logged

JC
Invermere, BC
1977 MC5C, 6V92/HT740
babell2
Full Member
***
Offline Offline

Posts: 198


Brice


WWW

Ignore
« Reply #5 on: August 18, 2013, 11:45:49 AM »

It's just a two jack process to remove the wheels easily with the rubber skirts, which I think look great and really help to keep things neat and tidy.  The first jack lifts at the body jacking point to lift the bus up in the air, then the second jack lifts the wheel so the tire is just off the ground.  With the clearance from having the bus body up you have easy clearance to pull the wheels off.

Brian
I have really been looking at a breakdown on body jacking points. MCI9 need to know where to shore up  body to work on suspension.

Sent from my C5155 using Tapatalk 2
Logged

1980 MCI-9 "The Last Resort" Located just south of Atlanta GA.
Just starting conversion. A long way to go!
The other Brice
rdbishop
Sr. Member
****
Offline Offline

Posts: 402


'68 MCI-7 892T, 740 Richard & Missy - Texas




Ignore
« Reply #6 on: August 21, 2013, 06:18:02 AM »

I have a full set and half plus one extra.  I will sell them all for $200.00 plus shipping.  Let me know if you are interested............. Richard
Logged
BJ
Full Member
***
Offline Offline

Posts: 144




Ignore
« Reply #7 on: August 30, 2013, 08:46:52 AM »

richard I tried to email you but it returned..is the email you posted current? anyway if you wtill have them I would like to have the fender skirts for my mc8   bill johnson  918 361 4446 or drivermci@aol.com
Logged
FloridaCliff
Hero Member
*****
Offline Offline

Posts: 2458


"The Mighty GMC"




Ignore
« Reply #8 on: August 30, 2013, 03:53:55 PM »

They look nice: maybe. They keep the wheels from spaying the side of the bus: maybe. But they sure make removing the wheels difficult. I have been thinking about removing them.

JC

Lostagain,

Personal opinion only, but i dislike the look of them.

I cut them off with a razor knife leaving the piece behind the fender molding.

It make changing tires much easier and I prefer the look.

If it rains and i am out driving, its getting a bath anyways....

Again, just personal preference.

Cliff
Logged

1975 GMC  P8M4905A-1160    North Central Florida

"There are basically two types of people. People who accomplish things, and people who claim to have accomplished things. The first group is less crowded."
Mark Twain
Dave5Cs
Hero Member
*****
Offline Offline

Posts: 1617


1979 MCI MC5Cs 6V-71 HT-740 Allison, Roseville, CA




Ignore
« Reply #9 on: August 30, 2013, 04:26:29 PM »

Cliff do have any side pictures with them cut off. I want to do mine that way too but wanted to see what it would look like first.

Dave5Cs
Logged

Sam 4106
Hero Member
*****
Offline Offline

Posts: 645





Ignore
« Reply #10 on: August 30, 2013, 05:28:14 PM »

Our MC8 has the rubber around the wheel wells, both front and rear. To remove any tire I use the campground air leveling system to raise the body as high as it will go on whichever corner I am removing a wheel. I place a steel spacer between the axle and the rubber bumper so the body can't come down. Then I use my new 20 ton air over hydraulic jack to lift the axle high enough to remove the wheel. Works for me.

Good luck, Sam
Logged

1976 MCI-8TA with 8V92 DDEC II and Allison HT740
lostagain
Hero Member
*****
Offline Offline

Posts: 1567


MC5C




Ignore
« Reply #11 on: August 30, 2013, 05:30:02 PM »

Cliff, you are right about the rain: the bus is getting wet and dirty anyway, no matter whether it has rubber skirts or not.

They look nice in an aerodynamic, slick way. But many buses have them in the front and not the rear, and that looks nice too, in a more functional way. So I think mine are coming off this winter when it is up on blocks getting PM done.

I have been thinking if I had to change a rear tire on the side of the road, at night, in the rain, with the OL impatiently waiting,   those skirts would be a PITA.

JC
Logged

JC
Invermere, BC
1977 MC5C, 6V92/HT740
FloridaCliff
Hero Member
*****
Offline Offline

Posts: 2458


"The Mighty GMC"




Ignore
« Reply #12 on: August 30, 2013, 05:43:38 PM »

Cliff do have any side pictures with them cut off. I want to do mine that way too but wanted to see what it would look like first.

Dave5Cs

Don't blame you, hard to glue them back on...  Smiley

I will take and post some on Saturday! 

Cliff
Logged

1975 GMC  P8M4905A-1160    North Central Florida

"There are basically two types of people. People who accomplish things, and people who claim to have accomplished things. The first group is less crowded."
Mark Twain
luvrbus
Hero Member
*****
Online Online

Posts: 12762




Ignore
« Reply #13 on: August 30, 2013, 05:47:13 PM »

Why worry about the rubber fender flares I spent days installing new ones on my MCI 8 the first trip out I blew out a new Michelin tire on the tag it wiped that side out so I replaced all with a Eagle aluminum wheel flare they are still on that bus
Logged

Life is short drink the good wine first
rdbishop
Sr. Member
****
Offline Offline

Posts: 402


'68 MCI-7 892T, 740 Richard & Missy - Texas




Ignore
« Reply #14 on: August 31, 2013, 08:21:59 PM »

BJ, I sent you an e-mail
Richard
Logged
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!