Bus Conversions dot Com Bulletin Board
December 20, 2014, 01:38:57 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 2 [3]  All   Go Down
  Print  
Author Topic: power steering fluid blowing overboard  (Read 4606 times)
David Anderson
Hero Member
*****
Offline Offline

Posts: 845


South Texas in the Eagle Ford Shale area




Ignore
« Reply #30 on: October 06, 2013, 03:00:19 PM »

I finally got the bus all put back together and took it out for a drive.  It whined for 6 miles anytime I turned the wheel.  It did not blow any fluid out of the gasket, however.  I stopped at a park and overfilled the reservoir a bit, and I heard no more whining after that, but of course all the fluids were at operating temps by then.   Not sure where to go from here.  I think I'll leave it alone for a while.  I have a Webasto problem I have to figure out, so I'll switch to that maintenance next. I'll save that for a different post. 
Logged
luvrbus
Hero Member
*****
Offline Offline

Posts: 13126




Ignore
« Reply #31 on: October 06, 2013, 03:09:20 PM »

You probably have a bad roller or a worn cam ring on the pump David

good luck
« Last Edit: October 06, 2013, 03:15:00 PM by luvrbus » Logged

Life is short drink the good wine first
gus
Hero Member
*****
Offline Offline

Posts: 3546





Ignore
« Reply #32 on: October 06, 2013, 08:05:23 PM »

Whining is just air being purged from the system.

It will also whine in cold weather when first used.
Logged

PD4107-152
PD4104-1274
Ash Flat, AR
luvrbus
Hero Member
*****
Offline Offline

Posts: 13126




Ignore
« Reply #33 on: October 07, 2013, 07:35:16 AM »

That is true Gus on a vane type pump he has a Eaton roller pump on his Eagle they whine if the roller or cam ring is worn till warm just annoying for a few minutes
Logged

Life is short drink the good wine first
David Anderson
Hero Member
*****
Offline Offline

Posts: 845


South Texas in the Eagle Ford Shale area




Ignore
« Reply #34 on: October 07, 2013, 03:54:08 PM »

That is true Gus on a vane type pump he has a Eaton roller pump on his Eagle they whine if the roller or cam ring is worn till warm just annoying for a few minutes
Don't mind the annoying noise part, but the ATF being blown out the reservoir lid gasket or the dipstick gasket when I attempt to turn the wheel is a mess around my alternator.
Logged
luvrbus
Hero Member
*****
Offline Offline

Posts: 13126




Ignore
« Reply #35 on: October 07, 2013, 04:04:30 PM »

www.strightlinesteering.com at one time had trouble shooting guide for the model B Eaton pump I cannot find my manual anywhere   Undecided
Logged

Life is short drink the good wine first
Pages: 1 2 [3]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!