Bus Conversion Magazine Bulletin Board
April 19, 2018, 07:09:06 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not be stolen by your mailman or your neighbor who also may be into buses.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Air leak  (Read 1742 times)
Derrick Thomas
Hero Member
Online Online

Posts: 1233

I may be nuts, but only for buses

« on: October 16, 2013, 01:45:39 PM »

I know this has been visited many times before but here it is. On my mc8 (with dd3) I have a pretty good hiss of air coming from under the floor in the spare tire compartment. I believe it to be associated with the brake system because when I set the park brake it stops. Release the park brake and the air flows. Making a service brake application has no effect. Brake diaphragm or inversion valve? What say all you bussin experts?

Sent from my PantechP9070 using Tapatalk 4 Beta

Some are called, some are sent, some just got up and went.

1998 MCI 102-DL3
Series 60 11.1/Alison B500
95% converted (they're never really done, are they?)
Hero Member
Offline Offline

Posts: 2459

"The Mighty GMC"

« Reply #1 on: October 16, 2013, 03:02:56 PM »


Sounds like a brake diaphragm leaking.

I have had this exact failure before.

If you have a large hose clamp (special vise grip), you can pinch off each side, one at a time, to find the offender.

Good luck in your hunt,


1975 GMC  P8M4905A-1160    North Central Florida

"There are basically two types of people. People who accomplish things, and people who claim to have accomplished things. The first group is less crowded."
Mark Twain
Hero Member
Offline Offline

Posts: 3245

1979 MCI MC5Cs 6V-71 644MT Allison, Roseville, CA

« Reply #2 on: October 16, 2013, 06:10:43 PM »

If after that does not do it try looking in the spare tire compartment or the tool compartment with someone pushing the push pull parking brake down and it starts leaking with a spray bottle of soap and water, spray the bottom of the peddle brake valve. If that isn't leaking spray your shuttle valve.


Toed 1998 Jeep TJ
Sr. Member
Offline Offline

Posts: 416

'68 MCI-7 892T, 740 Richard & Missy - Texas

« Reply #3 on: October 16, 2013, 07:28:34 PM »

Thomas, I just replaced my inversion valve that was doing what you said . Got it at napa, be sure and take it with you and mark your connections with finger nail polish or paint.

Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!