Bus Conversions dot Com Bulletin Board
November 24, 2014, 07:18:00 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It takes up much less space in your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: 740 Trans. ?  (Read 537 times)
rdbishop
Sr. Member
****
Offline Offline

Posts: 402


'68 MCI-7 892T, 740 Richard & Missy - Texas




Ignore
« on: October 28, 2013, 06:02:45 AM »

How can you find out if your trans. is set up for a 8-71 or 8-92. I know there is something inside they change to fit the motor.

Thanks Richard

Also, Will a 6-92 flex plate fit a 8-71?
Logged
luvrbus
Hero Member
*****
Offline Offline

Posts: 12908




Ignore
« Reply #1 on: October 28, 2013, 08:41:55 AM »

Get the number off the torque converter that is the only difference take it easy on the 8v71 converter it will work Joe has been running a 8v71 torque converter behind his 8v92 for years without a problem a 92 series torque converter is no problem behind a 8v71 they don't have enough power to stall a 92 series torque converter

 Yes the flex plate is the same for both engines but the center hub is different with a 71 hub the plate will work

good luck
« Last Edit: October 28, 2013, 09:30:27 AM by luvrbus » Logged

Life is short drink the good wine first
Don Fairchild
Hero Member
*****
Offline Offline

Posts: 759




Ignore
« Reply #2 on: October 28, 2013, 10:19:35 AM »

Richard, 
  I don't know what you are looking for but I use a 6V92 torque converter behind one of my high hp 8V71 TA's  it has great low end power. As Clifford said the hub is different between the 71 and the 92 engine the 71 will use  an 8 bolt hub and the 92 uses a 12 bolt hub.

Don
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!