Bus Conversions dot Com Bulletin Board
October 02, 2014, 03:41:41 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Where can I find this muffler hanger (pic attached)  (Read 1284 times)
belfert
Hero Member
*****
Offline Offline

Posts: 5446




Ignore
« on: October 26, 2013, 08:18:00 AM »

I ordered a new muffler for my bus.  It is a Nelson 86757M that is an oval 12"x15" muffler.  I called Nelson and they have no hangers for this muffler.  There are a few hangers for a 12"x15" muffler out there, but they don't match what I have.

Has anyone seen a muffler hanger for a 12"x15" muffler that looks like the one in the attached PDF?  MCI is out of stock although they have the muffler and most of the other exhaust parts.  (MCI wants three times as much for the muffler.)  I could probably reuse the existing hangers, but they are very rusty and I would just as well replace them.
Logged

Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN
luvrbus
Hero Member
*****
Offline Offline

Posts: 12595




Ignore
« Reply #1 on: October 26, 2013, 09:33:35 AM »

United Muffler should have the hangers
Logged

Life is short drink the good wine first
TomC
Hero Member
*****
Offline Offline

Posts: 6815





Ignore
« Reply #2 on: October 26, 2013, 10:01:17 AM »

My 10 x 15 muffler from Donalson-they had the hangers available. After looking at them though, it's not very hard to make your own. When I did my 10 x 15 oval for the bus, I used a 1" wide by 3/16" strap and bent it around the muffler (they're pretty strong when new). Then used some shock absorber rubbers for the insulators. Works just fine. Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
belfert
Hero Member
*****
Offline Offline

Posts: 5446




Ignore
« Reply #3 on: October 26, 2013, 12:36:11 PM »

I had no luck with United Muffler.  They told me to call Auto-Jet since I'm in the USA.  Auto-Jet wouldn't help me at all after I told them I had a coach bus and not a school bus.
Logged

Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN
belfert
Hero Member
*****
Offline Offline

Posts: 5446




Ignore
« Reply #4 on: October 27, 2013, 10:14:36 AM »

I'm trying to see if I can find an exact replacement hanger the same as in the PDF I attached.  It will certainly make things easier.  There are a few 12x15" oval muffler hangers out there, but they are different in design and would require rework.  If my muffler was 10"x15" oval I think it would be a lot easier as that is a far more common size.
Logged

Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN
Ralph7
Full Member
***
Offline Offline

Posts: 160




Ignore
« Reply #5 on: October 27, 2013, 11:21:39 AM »

        I had to search Auto-jet/United's webb site to find my muffler. I had to make my own brackets, but on an MC-8 it was easy.
       
Logged
Skykingrob
Full Member
***
Offline Offline

Posts: 234




Ignore
« Reply #6 on: October 27, 2013, 06:12:54 PM »

Brian
I noticed a salvaged Dina in a yard in southern  Missouri about a month ago. I am going by there tomorrow on the way to Marion, IL. I will get you the name/number of the yard and get it to you. It looked like it was a fire in the front on the coach so maybe the rear is in good shape.

Rob
Missouri
Logged
B_K
Sr. Member
****
Offline Offline

Posts: 436




Ignore
« Reply #7 on: October 27, 2013, 11:24:47 PM »

Rob please do let us know where it is as I might can use some parts off it as well.

Where at in So. MO?
Grin  BK  Grin
Logged
Len Silva
Hero Member
*****
Offline Offline

Posts: 4086


Angle Parked in a Parallel Universe


WWW

Ignore
« Reply #8 on: October 28, 2013, 06:23:20 AM »

I would just take whats left of the hangers you have to some local fab shop and ask them to make you one.  Probably faster, cheaper and easier that any other route.
Logged


Hand Made Gifts

Ignorance is only bliss to the ignorant.
belfert
Hero Member
*****
Offline Offline

Posts: 5446




Ignore
« Reply #9 on: October 28, 2013, 06:33:21 AM »

I figure it would be cheaper and easier to buy a new hanger rather than get one fabricated.  It is really more that I would like to have new hangers than that I need to have new hangers.  If I cut the bolts off on the existing hangers I should be able to reuse them just fine.  I don't think they are rusty enough to break.

It wouldn't be worth trying to get hangers off a salvage Dina as they aren't likely to be in much better condition than what I have.  As B_K said, it would be nice to know where the salvage Dina is for future reference.  Carl Raines used to have several salvage Dinas in southeast Illinois, but he closed or sold the business and scrapped his Dinas.

Logged

Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN
Skykingrob
Full Member
***
Offline Offline

Posts: 234




Ignore
« Reply #10 on: October 29, 2013, 05:11:25 PM »

Hey Brian and BK
A to Z Big Truck Salvage, Mountain View, MO (on highway 60) 417-934-1911, hours Tuesday-Saturday 0800-1700.

HTH

Rob
Missouri
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!