Bus Conversions dot Com Bulletin Board
August 20, 2014, 09:39:26 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It can be read on any computer, iPad, smart phone, or compatible device.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Fuel Pro fuel filter  (Read 385 times)
Mike in GA
Sr. Member
****
Offline Offline

Posts: 266




Ignore
« on: April 14, 2014, 11:51:32 AM »

Recently installed the see-through Fleetguard Fuel Pro Series 230 filter on the 8v92 TA.
Big improvement over the standard two spin-on filter operation that came standard.         
      Time to change the Fuel Pro filter element. I see from the Fleetguard website that there are several choices for the filter element, ranging from 2 microns, through 7, 10, 25, and even 50 microns.
     Which filter rating is recommended for our type of use?
     Thanks in advance!
Mike in GA
Logged

Past President, Southeast Bus Nuts. Busin' for more than 12 years in a 1985 MC 96a3 with DD 8v92 and a 5 speed Allison c/r.
luvrbus
Hero Member
*****
Offline Offline

Posts: 12207




Ignore
« Reply #1 on: April 14, 2014, 12:51:25 PM »

DD says nothing above 12 but most use the alternate 5 microns for the 8v92 per DD

good luck
Logged

Life is short drink the good wine first
Mike in GA
Sr. Member
****
Offline Offline

Posts: 266




Ignore
« Reply #2 on: April 16, 2014, 08:06:53 AM »

Thanks Cilfford. Is that 5 micron flilter a Fleetguard Fuel Pro, or some other brand?
Cheers!
Mike in GA
Logged

Past President, Southeast Bus Nuts. Busin' for more than 12 years in a 1985 MC 96a3 with DD 8v92 and a 5 speed Allison c/r.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!