Bus Conversions dot Com Bulletin Board
September 19, 2014, 08:53:56 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Wiper delay switch?  (Read 274 times)
goutoe
Jr. Member
**
Offline Offline

Posts: 81





Ignore
« on: May 24, 2014, 07:08:28 AM »

Have any of you guys added a wiper delay/ mist switch? my wipers are electric 2 speed on seperate switches, I have found a few on line, about 100 bucks ea. I would need 2 to do it right, or just one on the drivers side to get by, any ideas of a good brand to buy, or what not to buy? Thanks.>>>>> John.
Logged

John & Linda 1977 AM General 6V92 turbo Detroit 3 Speed allison, 40 ft.
TomC
Hero Member
*****
Offline Offline

Posts: 6783





Ignore
« Reply #1 on: May 24, 2014, 07:20:42 AM »

I also have an AMGeneral. I converted my air wipers to two electric motor system. It is controlled by a single rotating switch that also keeps the motors synchronized. The switch includes adjustable delay, low speed, high speed, push to wash. I used this company:
http://www.amequipment.com/ Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
eagle19952
Hero Member
*****
Online Online

Posts: 1014




Ignore
« Reply #2 on: May 24, 2014, 08:24:28 AM »

I think there is a bit more info needed to help selevt a switch. Like voltage, one switch or two, and if the current motor(s) are permanent magnet etc.
Try looking here: I FIXED THE LINKS I THINK....SORRY

http://www.colehersee.com/home/item/cat/120/75600-04/

http://www.colehersee.com/home/grid/cat/121/

http://www.colehersee.com/assets/files/catalogs/1303152527-CLH-080MasterCatSectionE.pdf


« Last Edit: May 24, 2014, 02:14:26 PM by eagle19952 » Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!