Bus Conversion Magazine Bulletin Board
May 27, 2018, 09:03:04 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: The dog will not eat it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Intellitic Big Boy Relay  (Read 1027 times)
Jr. Member
Offline Offline

Posts: 69

« on: June 16, 2014, 06:41:06 PM »

I have installed an Intellitic Big Boy Relay.  I have noticed that it gets to hot to touch.  Is this normal for these relays to do that or is this an indication that something could be wrong with the relay.  It gets hot even when there is no load on it.  Anyone else have this same relay or can shed some light on this issue, I would appreciate any input.

Thanks!  Jim

"No man is a bus."
Hero Member
Offline Offline

Posts: 3614

« Reply #1 on: June 16, 2014, 07:11:35 PM »

Do you have one of these in your system ?

or one of this ?

I have no clue about the system you are using, but it sounds interesting  Huh
good luck.

The 200 amp version is not a continuous duty unit and requires an Intellitec Isolator - diesel controller to prevent it from overheating when it is used for continuous duty. A momentary, dash-mounted switch can also be added to provide a "jump start" for the engine, from the auxiliary battery....


« Last Edit: June 16, 2014, 07:31:30 PM by eagle19952 » Logged

Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!