Bus Conversions dot Com Bulletin Board
December 01, 2015, 10:04:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 500 Members as of May 5th, 2006.  Smiley  4,292 Members as of January 24, 2015 Cheesy

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: A/C and powersteering lines.  (Read 775 times)
Offline Offline

Posts: 38

« on: January 02, 2007, 05:30:29 PM »

I'm getting ready to install dash air A/c and power steering in my 05 Eagle, I am planing to run steel lines the length of the bus with rubber hose at both ends. My question is, what side lines should I run ? I have in mind 3/8 for the high pressure and 1/2 for the return low pressure.Any and all input welcome,thanks.
Hero Member
Offline Offline

Posts: 7404

« Reply #1 on: January 03, 2007, 04:35:49 PM »

Remember that the pressure line of the power steering can top out at 2500psi, even higher when cold.  Good Luck, TomC

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!