Bus Conversions dot Com Bulletin Board
August 21, 2014, 04:58:19 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: By clicking on any ad, a hotlink takes you directly to the advertiserís website.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: A/C and powersteering lines.  (Read 651 times)
Slide
Newbie
*
Offline Offline

Posts: 37




Ignore
« on: January 02, 2007, 05:30:29 PM »

I'm getting ready to install dash air A/c and power steering in my 05 Eagle, I am planing to run steel lines the length of the bus with rubber hose at both ends. My question is, what side lines should I run ? I have in mind 3/8 for the high pressure and 1/2 for the return low pressure.Any and all input welcome,thanks.
Logged
TomC
Hero Member
*****
Offline Offline

Posts: 6720





Ignore
« Reply #1 on: January 03, 2007, 04:35:49 PM »

Remember that the pressure line of the power steering can top out at 2500psi, even higher when cold.  Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!