Bus Conversion Magazine Bulletin Board
March 22, 2018, 02:18:06 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at (657) 221-0432 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: wheel studs  (Read 3878 times)
Offline Offline

Posts: 3

« on: April 25, 2006, 05:54:45 PM »

I am installing aluminum wheels on an MC8. I have determined that the wheel studs wil have to be  changed. Any tips or tricks will be greatly apreciated Thank you
Some Assembly Required
Hero Member
Offline Offline

Posts: 4085

Slightly modified 1982 MC9


« Reply #1 on: April 25, 2006, 07:25:13 PM »

Take a look at the mechanical section on my web site (bus.gumpydog.com). Find the site map and the mechanical section. Under that, you'll find steer, drive and tag axle maintenance. One or more of these have some info on how I changed mine, including some things I did incorrectly. It's ok if you learn from my mistakes.

Use a length of pipe to press the studs into the hub. Don't pound on the end of the stud, or draw them in with the backing nuts (I did both, one worked, one didn't, but neither were correct). The pipe worked best.

Getting the old ones out is easy if the hub is off the bus. Good time to check the bearings, change the seals and wipers and do any brake or suspension maintenance.



Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!