Bus Conversions dot Com Bulletin Board
October 23, 2014, 09:35:16 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 2 3 [4]   Go Down
  Print  
Author Topic: 8V92 Oil  (Read 11167 times)
TomC
Hero Member
*****
Offline Offline

Posts: 6853





Ignore
« Reply #45 on: September 13, 2013, 11:13:37 AM »

In case you have a 149 series in your bus, 50 weight is also recommended (LOL). Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
wg4t50
Hero Member
*****
Offline Offline

Posts: 802





Ignore
« Reply #46 on: September 13, 2013, 12:17:01 PM »

TomC,
You got it, I stayed clear of the 149 & 278A series, but had to get into the 110 series in case  you need any timing pins for a 110 ?.
Think can still find a few.
The reason for the 50 is better proven luck on the 8V-92 rear main, the 6V does not seem to have the issue.
As for the AT&T operation, my guess it was with the 12V-71 or 16V-71 as the71 series does not have the rear main issue like the 92, the part is a generator has a different duty cycle than a highway engine, like never being loaded under 1800 rpm etc, etc. when oil pressure is lower, off idle WOT.
Just another experienced view.
« Last Edit: September 13, 2013, 12:38:16 PM by wg4t50 » Logged

MCI7 20+ Yrs
Foretravel w/ISM500
WG4T CW for over 50 wpm for ever.
Central Virginia
DaveNCari
Jr. Member
**
Offline Offline

Posts: 80





Ignore
« Reply #47 on: September 13, 2013, 12:53:19 PM »

Any Oreillys can order Delo 100 in straight 40.....that's where I get mine.   

DG
Logged

Coming soon.....need of a bus-friendly RV park.....that values Liberty!

Watch this space....
RJ
Former Giant Greenbrier Owner
Hero Member
*****
Offline Offline

Posts: 2845





Ignore
« Reply #48 on: September 13, 2013, 07:41:15 PM »

Any O'Reillys can order Delo 100 in straight 40.....that's where I get mine.

Part Number:  100-40-1 CHV  (CHV goes in vendor box, if counterman's stumped.)

FWIW & HTH. . .

 Wink
Logged

RJ Long
PD4106-2784 No More
Fresno CA
uncle ned
Hero Member
*****
Offline Offline

Posts: 929



WWW

Ignore
« Reply #49 on: September 14, 2013, 07:01:06 PM »



Worked around the 12v71 generators at our hospitals.  they were tested once a week. 0 to 18oo rpm in a instance. if not special detroit men were sent to check.

Not a room to be in pulling telephone wire through during a lightning storm.

instance hearing problem.

uncle ned
Logged

4104's forever
6v92 v730
Huggy Bear
Pages: 1 2 3 [4]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!