Bus Conversion Magazine Bulletin Board
January 17, 2018, 10:27:51 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not be stolen by your mailman or your neighbor who also may be into buses.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Prevost baggage compartment door, need replacement.  (Read 626 times)
chuckd
Sr. Member
****
Offline Offline

Posts: 289





Ignore
« on: September 15, 2017, 06:22:03 AM »

I had a brain burp, and creased my 1979 Prevost stainless steel baggage compartment door.  It is 33 X 45, any idea where I can get a replacement.  Have not tried Prevost, as I wanted to have an idea of what a used door might sell for, if I can find one.  Thanks everyone.
Chuckd Stillwater mn
Logged
robertglines1
steam nut
Hero Member
*****
Offline Offline

Posts: 4361





Ignore
« Reply #1 on: September 15, 2017, 07:01:04 AM »

do you have 35ft coach?  I have frame for one that is 53" I will double check.. If it is lower foot only you can have that skin made at local sheet metal shop...   Steve at IBP   International bus parts is best bet
Logged

Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana
luvrbus
Hero Member
*****
Offline Offline

Posts: 18728




Ignore
« Reply #2 on: September 15, 2017, 07:19:12 AM »

Wish my doors would work for you as I have a complete set of engine and bays doors from a 2005 Country Coach Prevost all nice and shiny 
Logged

Life is short drink the good wine first
chuckd
Sr. Member
****
Offline Offline

Posts: 289





Ignore
« Reply #3 on: September 15, 2017, 07:22:11 AM »

Yes, mine is a 35 foot.  Will try a sheet metal shop, not sure if there is one i trust around here Lips Sealed
Chuckd Stillwater MN
Logged
OneLapper
Hero Member
*****
Offline Offline

Posts: 853



WWW

Ignore
« Reply #4 on: September 15, 2017, 08:25:43 PM »

Yes, mine is a 35 foot.  Will try a sheet metal shop, not sure if there is one i trust around here Lips Sealed
Chuckd Stillwater MN

If your door is polished, it's #8 finished stainless steel.  A shop can make that lower piece pretty cheap, otherwise Steve at IBP is your man.
Logged

OneLapper
1964 PD4106-2853
www.markdavia.com
OneLapper
Hero Member
*****
Offline Offline

Posts: 853



WWW

Ignore
« Reply #5 on: September 15, 2017, 08:29:47 PM »

Wish my doors would work for you as I have a complete set of engine and bays doors from a 2005 Country Coach Prevost all nice and shiny 

Cliff!  I wish I knew you had those doors!!  I spent 4 hours with a hammer and acetylene torch straightening out the AC door on a XL2, the panels from IBP were $1500.
Logged

OneLapper
1964 PD4106-2853
www.markdavia.com
Skykingrob
Sr. Member
****
Offline Offline

Posts: 262




Ignore
« Reply #6 on: September 16, 2017, 06:12:01 PM »

Look at the egde of the door behind the rub rail. That is where the top panel laps over the bottom panel. You should only have to replace the top or bottom unless both are damaged. If it is the bottom panel, there is a man in Nixa MO that can bend up the bottom panel since it is just high polish SS but with bottom lip. If it is the top panel you need, then Steve at IBP industries is the best choice unless you can get it directly from Prevost. The bottom panels are about $375-500 and the top panels are about $1200-1500.
HTH

Rob
91 Prevost
Missouri
Logged
luvrbus
Hero Member
*****
Offline Offline

Posts: 18728




Ignore
« Reply #7 on: September 16, 2017, 06:19:26 PM »

Cliff!  I wish I knew you had those doors!!  I spent 4 hours with a hammer and acetylene torch straightening out the AC door on a XL2, the panels from IBP were $1500.


You know where they are at now if you ever need one
Logged

Life is short drink the good wine first
robertglines1
steam nut
Hero Member
*****
Offline Offline

Posts: 4361





Ignore
« Reply #8 on: September 17, 2017, 05:30:04 AM »

If frame --I have one you or I can cut down.   Bob
Logged

Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!