Bus Conversions dot Com Bulletin Board
July 22, 2014, 10:26:16 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If your computer is lost, damaged, or stolen, we will replace all of your E-Mags for free.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: What bulbs to use in Stop/Tail/Directional MCI  (Read 944 times)
Jerry32
Hero Member
*****
Offline Offline

Posts: 726





Ignore
« on: March 12, 2007, 03:30:45 PM »

I was trying to find bulb numbers for the tailight and directional andstop lights on a 88 MC 9 / 102a3. The book lists a number fpr each but it is the part number for the whole light assy 24V and when I go to truck light that makes it they don't show the bulb required. I have to go get the bus and drive it home and know there is a light out but don't have it here so I can look and see. Jerry
Logged

1988 MCI 102A3 8V92TA 740
NJT5047
Hero Member
*****
Offline Offline

Posts: 1942





Ignore
« Reply #1 on: March 12, 2007, 03:55:34 PM »

Jerry, I don't know about your 102 new square style lights, but an older  9 uses a modular deal that is replaced in total.  A "sealed beam" if you will.   
Call Luke (or Mike at US Coach) , he'll tell you for certain. 
Best, JR

Logged

JR Lynch , Charlotte, NC
87 MC9, 6V92TA DDEC, HT748R ATEC

"Every government interference in the economy consists of giving an unearned benefit, extorted by force, to some men at the expense of others.

Ayn Rand
Jerry32
Hero Member
*****
Offline Offline

Posts: 726





Ignore
« Reply #2 on: March 12, 2007, 04:02:34 PM »

That might be the case here as the book list numbers for trucklight and when I go to their web and put in the numbers is gives me a description of a rectangular 24V light in each case. I guess then I would have to order from trucklight or???   Jerry
Logged

1988 MCI 102A3 8V92TA 740
NJT5047
Hero Member
*****
Offline Offline

Posts: 1942





Ignore
« Reply #3 on: March 12, 2007, 04:07:19 PM »

A phone call will resolve?    You probably have modular lights. 
Keeps the lens looking good.   MC9 lights are cheap...about $9 bucks for a turn or tail light.   I had to replace one because the crappy little plug is...well.....crappy.  Replace is too easy.  Just push or pull and they'll pop right out.
JR

Logged

JR Lynch , Charlotte, NC
87 MC9, 6V92TA DDEC, HT748R ATEC

"Every government interference in the economy consists of giving an unearned benefit, extorted by force, to some men at the expense of others.

Ayn Rand
Jerry32
Hero Member
*****
Offline Offline

Posts: 726





Ignore
« Reply #4 on: March 12, 2007, 04:34:40 PM »

I just called the local napa store and they say it would have to come from the factory. I will try the web and see if you can order from trucklight.  Jerry
Logged

1988 MCI 102A3 8V92TA 740
Jerry32
Hero Member
*****
Offline Offline

Posts: 726





Ignore
« Reply #5 on: March 12, 2007, 04:45:25 PM »

Nobody stock 24V lights so guess I wont be fixing the tailight that is out right away. I thought I might get it going before the 2500 mile tour of the US.   Jerry
Logged

1988 MCI 102A3 8V92TA 740
NJT5047
Hero Member
*****
Offline Offline

Posts: 1942





Ignore
« Reply #6 on: March 12, 2007, 04:50:24 PM »

Luke stocks them and I'd get it working.  The fewer 'issues' that can get you pulled over!
JR
Logged

JR Lynch , Charlotte, NC
87 MC9, 6V92TA DDEC, HT748R ATEC

"Every government interference in the economy consists of giving an unearned benefit, extorted by force, to some men at the expense of others.

Ayn Rand
Ednj
Hero Member
*****
Offline Offline

Posts: 997


Ed & Sue Skiba




Ignore
« Reply #7 on: March 12, 2007, 05:15:54 PM »

My 9 has bulbs P/N 623/24/V6CP.
I have gotten them from Luke as well as NAPA.
I put the same bulbs in the clearance lights.
The tail light bulbs come out in the engine compartment 1/4 turn sockets.
 Grin
The ones from NAPA are #T624 / 3J
« Last Edit: March 12, 2007, 05:26:24 PM by Ednj » Logged

MCI-9
Sussex county, Delaware.
See my picture's at= http://groups.yahoo.com/group/busshellconverters/
That's Not Oil Dripping under my Bus, It's Sweat from all that Horsepower.
----- This space for rent. -----
Jerry32
Hero Member
*****
Offline Offline

Posts: 726





Ignore
« Reply #8 on: March 12, 2007, 05:23:25 PM »

How do I get a hold of luke???   Jerry
Logged

1988 MCI 102A3 8V92TA 740
Ednj
Hero Member
*****
Offline Offline

Posts: 997


Ed & Sue Skiba




Ignore
« Reply #9 on: March 12, 2007, 05:42:13 PM »

How do I get a hold of luke???   Jerry
(856)767-4848 or 1-888-262-2434.
Logged

MCI-9
Sussex county, Delaware.
See my picture's at= http://groups.yahoo.com/group/busshellconverters/
That's Not Oil Dripping under my Bus, It's Sweat from all that Horsepower.
----- This space for rent. -----
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!