Bus Conversion Magazine Bulletin Board
June 20, 2018, 11:40:47 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: High temp/pressure electric over oil valve source?  (Read 2334 times)
Brian Diehl
Hero Member
Offline Offline

Posts: 1147


« on: May 09, 2006, 02:54:50 PM »

I'm looking for a "shrader" valve to use for forcing my transmission into torque converter lockup while climbing mountain grades in 1st or 2nd gear.  I searched on line and can't seam to find a 12v/24v DC valve capable of the high temperatures and pressures found on the high pressure supply port of the HT750 tranny.  I'm thinking the valve needs to handle upper 200s low 300s for temperatures and pressures up to 350lbs.  Any ideas of where to get a decently priced valve to handle these conditions?

« Reply #1 on: May 09, 2006, 03:19:05 PM »

Hydraulic solenoid valves.

Check your local hydraulic supply store or even Grainger or McMasters.

Pretty standard ratings up to 3,000 psi. ( temp not an issue on them.)
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!