Bus Conversions dot Com Bulletin Board
September 02, 2014, 09:59:50 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It can be read on any computer, iPad, smart phone, or compatible device.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: High temp/pressure electric over oil valve source?  (Read 1118 times)
Brian Diehl
Hero Member
*****
Offline Offline

Posts: 982




Ignore
« on: May 09, 2006, 02:54:50 PM »

I'm looking for a "shrader" valve to use for forcing my transmission into torque converter lockup while climbing mountain grades in 1st or 2nd gear.  I searched on line and can't seam to find a 12v/24v DC valve capable of the high temperatures and pressures found on the high pressure supply port of the HT750 tranny.  I'm thinking the valve needs to handle upper 200s low 300s for temperatures and pressures up to 350lbs.  Any ideas of where to get a decently priced valve to handle these conditions?
Logged
DrDave
Guest

« Reply #1 on: May 09, 2006, 03:19:05 PM »

Hydraulic solenoid valves.

Check your local hydraulic supply store or even Grainger or McMasters.

Pretty standard ratings up to 3,000 psi. ( temp not an issue on them.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!