Bus Conversion Magazine Bulletin Board
January 21, 2018, 02:42:02 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at (657) 221-0432 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: High temp/pressure electric over oil valve source?  (Read 2124 times)
Brian Diehl
Hero Member
Offline Offline

Posts: 1143


« on: May 09, 2006, 02:54:50 PM »

I'm looking for a "shrader" valve to use for forcing my transmission into torque converter lockup while climbing mountain grades in 1st or 2nd gear.  I searched on line and can't seam to find a 12v/24v DC valve capable of the high temperatures and pressures found on the high pressure supply port of the HT750 tranny.  I'm thinking the valve needs to handle upper 200s low 300s for temperatures and pressures up to 350lbs.  Any ideas of where to get a decently priced valve to handle these conditions?

« Reply #1 on: May 09, 2006, 03:19:05 PM »

Hydraulic solenoid valves.

Check your local hydraulic supply store or even Grainger or McMasters.

Pretty standard ratings up to 3,000 psi. ( temp not an issue on them.)
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!