Bus Conversion Magazine Bulletin Board
April 23, 2018, 06:47:37 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at (657) 221-0432 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Wiper Parts, infor  (Read 1470 times)
BC Bus
Jr. Member
Offline Offline

Posts: 81

« on: October 17, 2007, 07:53:20 AM »

On my 1972 GMC 4108
I have the following challenge;
One of my wipers is slipping on the old air motor shaft. The little splines on the  shaft are pretty well  
 stripped The shaft that the wiper blade clamps to looks
like it might be removable and replacable, by removing a small snap ring
Anyone know for sure? If it is replacable, who has 'em?

« Last Edit: October 17, 2007, 09:19:21 AM by BC Bus » Logged

GMC Buffalo  &  MC9

Always willing to help a Busnut !

« Reply #1 on: October 17, 2007, 08:13:56 AM »

We need more information in order to help you.

What kind of coach, year and model?


« Reply #2 on: October 17, 2007, 08:18:13 AM »

we just cured that problem on a friends schoolie, we drilled the shaft arm and put in a set screw, if it's the same problem he had, his was the shaft moved appropriately, just didn't grab the arm well enough to move it right.
Tim Bookmiller
G.M. 4106 #pd1825
Offline Offline

Posts: 48

« Reply #3 on: October 17, 2007, 06:36:17 PM »

 1972-4108 Give the guys at U.S. Coach a call for any of your needs even info.
856-767-4848    The best there is
Full Member
Offline Offline

Posts: 107

« Reply #4 on: October 18, 2007, 05:51:07 AM »

I had the same problem when I had my 4108. I drilled it and put a small bolt through it. It worked fine after that.
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!