Bus Conversion Magazine Bulletin Board
February 25, 2018, 02:04:05 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at (657) 221-0432 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Loacting Generator Gauges  (Read 1986 times)
Pig Rig IV
Offline Offline

Posts: 5

« on: June 01, 2006, 03:57:55 PM »

I need gauges for my genny,  currently have a 5k and moving into a 12.5 k,  i would like both amperage and voltage gauage to mount in the rig,  we are on a budget like everyone else,  looking for suggestion,  Thanks Pig Rig Crew
Hero Member
Offline Offline

Posts: 1084

« Reply #1 on: June 01, 2006, 05:26:56 PM »

I found a very nice panel on the eb?y. It had a hour meter, amp meter but best of all it had several 120 and 240 volt receptacles, as well as reset breaker buttons. Paid $30.00 plus shipping. Retails for about $200.00

If that doesn't work look at ISSPRO gauges, I have had really good luck with them.


Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California
Sr. Member
Offline Offline

Posts: 426

1988 Neoplan AN 340, 6V-92 TA DDEC II, HT 748 ATEC

« Reply #2 on: June 01, 2006, 06:45:31 PM »

Try Surplus Center at   WWW.surpluscenter.com


location: South central Ohio

I'm very conservative, " I started life with nothing and still have most of it left".
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!