Bus Conversions dot Com Bulletin Board
October 31, 2014, 12:06:43 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Overheated  (Read 1061 times)
robert
Newbie
*
Offline Offline

Posts: 28





Ignore
« on: June 06, 2006, 06:53:51 AM »

Hey all, I was coming over Vail pass(Colorado) with my Model 10 with a 6v92/ 5 speed manual. I was running in 3rd gear with my oil pressure at 55 and my eng. temp at 200F. I normally run at 190F unless I am pulling a hill. I overheated to 208 F and my high temp shut down activated. Once it cooled down I pulled the pass just fine. However now my eng temp. runs at 180 F on the flats no matter what speed. Did I mess something up?HuhHuhHuh?
Logged

Thanks, Robert at www.tamihall.com
TomC
Hero Member
*****
Offline Offline

Posts: 6868





Ignore
« Reply #1 on: June 06, 2006, 07:23:33 AM »

You really didn't overheat.  208 is getting there but still below critical.  What it does sound like is that maybe the heat jarred open the second thermostat, so now you're getting full flow throught the radiator.  When back, I would pull and check the thermostats to make sure they are both opening nearly simultaneously-and this is something you can do with a big pot heating up the water with the thermostats inside and just watching.  Best if you have a cooking thermometer to observe the temp when they open.  Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
gumpy
Some Assembly Required
Hero Member
*****
Offline Offline

Posts: 3274


Slightly modified 1982 MC9


WWW

Ignore
« Reply #2 on: June 06, 2006, 07:30:28 AM »

On the bright side, it sounds like your overtemp shutdown system is working properly.

Logged

Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"
Stan
Hero Member
*****
Offline Offline

Posts: 973




Ignore
« Reply #3 on: June 06, 2006, 08:37:16 AM »

A caclulator found with Google shows water boils at 191.5 F so you have to have a good pressure cap on your system at that altitude. Just something else to have checked before going over the high passes.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!