Bus Conversions dot Com Bulletin Board
December 20, 2014, 07:02:15 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not incur forwarding fees when you are on the road.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: Just a suggestion...  (Read 3019 times)
gumpy
Some Assembly Required
Hero Member
*****
Offline Offline

Posts: 3353


Slightly modified 1982 MC9


WWW

Ignore
« on: June 06, 2006, 11:32:18 AM »

I was just reading a post by a fellow trying to move an old bus which has been sitting for some time and has flat tires and questionable engine. He's asking for advice on how to remove the tires or get them aired up, etc.

Not to single this one guy out, but it seems to me that if people would take the time to set up their bb profile so it includes where they are located, there might actually be other bus nuts in the area who would be willing to come help, and who probably have the tools (jacks, wrenches, electrical, knowledge, etc) to help ease the burden.

If this fellow was located within a reasonable distance from me, I'd gladly bring my air wrench, generator, compressor, tire bars, hoses, tow rope, etc, and help him change his tires. Might even help him see if the old girl is ready to run again. It would be worth the time to see the old bus, and make a new busnut friend.

Just a suggestion.

craig
Logged

Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"
DrivingMissLazy
Hero Member
*****
Offline Offline

Posts: 2634




Ignore
« Reply #1 on: June 06, 2006, 11:51:07 AM »

Craig, we are working on a national map with balloon type indicators which will show the location of each member that elects to have themselves included. I think it will be a great help for cases like this. As you scroll over the balloon, it will give the members name, city and state.

One of the problems might be that some members will not want their phone number listed, and some members will not include their real name, so it might be tough to track some of the people down sometimes, but it will be a start.

Dallas and I have both spent a considerable amount of time trying to get it set up and I think Phil plans on releasing it in the next few days.

Just another bonus from the MAK board.

Richard


I was just reading a post by a fellow trying to move an old bus which has been sitting for some time and has flat tires and questionable engine. He's asking for advice on how to remove the tires or get them aired up, etc.

Not to single this one guy out, but it seems to me that if people would take the time to set up their bb profile so it includes where they are located, there might actually be other bus nuts in the area who would be willing to come help, and who probably have the tools (jacks, wrenches, electrical, knowledge, etc) to help ease the burden.

If this fellow was located within a reasonable distance from me, I'd gladly bring my air wrench, generator, compressor, tire bars, hoses, tow rope, etc, and help him change his tires. Might even help him see if the old girl is ready to run again. It would be worth the time to see the old bus, and make a new busnut friend.

Just a suggestion.

craig

Logged

Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body. But rather to skid in sideways, chocolate in one hand, a good Reisling in the other, body thoroughly used up, totally worn out and screaming:  WOO HOO, what a ride
plyonsMC9
Global Moderator
Hero Member
*****
Offline Offline

Posts: 1160


Big Wheels Turnin'


WWW
« Reply #2 on: June 06, 2006, 12:05:38 PM »

Hi Craig,

That is a great idea - In my signature, I have my area of the country, many others do as well.  But as you bring up Criag, it could be very helpful in many situations.  I have received several extra offers of help from those nearby my location that I wouldn't have received if my location hadn't been posted. 

Along the same lines, the upcoming interactive map should also be a real benefit in locating nearby help and fellow bus nuts.  Richard and Dallas should have more news on that fun new feature soon!

For those who haven't modified your profile to reflect your area of the country and feel inclined to do so: 

Go to the PROFILE button (top of this page) , then choose to EDIT PROFILE. 

Go to the signature, and modify it to reflect your area of the country.  You can be as specific (Carrollton, TX) or as general (ex: northern Illinois)  as you feel would be helpful. 

Hi Richard, this thread may be a candidate for moving to the help board at some point.  ?

Best Regards, Phil
Logged

Northern Arizona / 1983 - MC9
Len Silva
Hero Member
*****
Offline Offline

Posts: 4086


Angle Parked in a Parallel Universe


WWW

Ignore
« Reply #3 on: June 06, 2006, 12:19:11 PM »

Great idea.  Could the profile layout be changed to include:
Bus type/info
Mechanical help available
Parking/hookups - come visit

much like the FMCA listings.
I would also suggest that profiles be visible only to members (if not that way already).
Logged


Hand Made Gifts

Ignorance is only bliss to the ignorant.
gumpy
Some Assembly Required
Hero Member
*****
Offline Offline

Posts: 3353


Slightly modified 1982 MC9


WWW

Ignore
« Reply #4 on: June 06, 2006, 12:25:11 PM »

Yeah, I looked at the map the other day. It's coming along nicely, but the problem is that it's not tied to the profile. It's a separate entity alltogether that each individual must go register for. So when someone posts that he's having such and such a problem, I can't just click on his name and find out where he's located. And trying to locate him on the national (international?) map is not going to be very effective when we get all 666 members (wow, compare that number with today's date Smiley That's just freakin wierd!!) registered on the map. It'll look like Alquburque skys during the balloon fest.

Logged

Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"
DrivingMissLazy
Hero Member
*****
Offline Offline

Posts: 2634




Ignore
« Reply #5 on: June 06, 2006, 12:37:24 PM »

Even with the profile information, you would have a hard time locating anyone as most have included very little, if any, personal information.

For those who elect to supply some information for the map it is much easier to locate someone in a specific area of the country with the map instead of leafing thru 600+ profiles.
 
There is also a Shout Out area of the map where personal information such as Len requested.

Richard

Yeah, I looked at the map the other day. It's coming along nicely, but the problem is that it's not tied to the profile. It's a separate entity alltogether that each individual must go register for. So when someone posts that he's having such and such a problem, I can't just click on his name and find out where he's located. And trying to locate him on the national (international?) map is not going to be very effective when we get all 666 members (wow, compare that number with today's date Smiley That's just freakin wierd!!) registered on the map. It'll look like Alquburque skys during the balloon fest.


Logged

Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body. But rather to skid in sideways, chocolate in one hand, a good Reisling in the other, body thoroughly used up, totally worn out and screaming:  WOO HOO, what a ride
Dallas
Guest

« Reply #6 on: June 06, 2006, 12:52:11 PM »

Wow Richard,
I wondered what the Shout out Thingy was for.
I haven't had much time to play on it for the last few days.
I've ben to busy replacing rivets in a Newell Coach.
ARRRRGGHHHHHH
It seems like THOUSANDS!!!!
By hand.

Dallas
Logged
Brill-o
Full Member
***
Offline Offline

Posts: 113




Ignore
« Reply #7 on: June 06, 2006, 02:01:16 PM »

Helloó

First off--please have eaten and gone to the Loo (restroom) before sitting down to read this--it's that long a read!


Thank you Craig, for reading and replying to my post. I thought it was to be passed on with no interest.

I wasnít thinking of calling out the troopsóespecially onesí Iíd only introduced myself to a couple of days before.

I take your comments and responses very much to heart and would like to thank you so much for such a kind offer. Simply amazing from someone who wouldnít know me from ďAdamĒ.

Although this thread turned into mapping and stickies, Iím going to reply to my other post here since this is where your answer originated.

I understand it was not directed at meóbut lets face it, my post was the ďbell-the-catĒ post that brought this to light.

Iíd mentioned it took me hours of fiddling just to get the pics loaded. Iím just not to savvy with PCís. I had no idea about the profile thing, and as this seems to be an issue, until I get that done I can give a short run-down of a profile of sortsó

Iím an semi-retired British bloke with a famí of two ďankle-bitersĒ (girls) and a very smart Yank Wife. She works for the Nat. Park Service, whilst I mind the girls and do part time local digging and hauling.

We are situated in the northern most tip of Va. and Iím a (totally insane) vehicle buff. The Wife is somewhat hobbyist also- (she has a 70í Boss 302 Mustang).
 I still have my green card and we go back ďhomeĒ every few years.
We live on approx. 14 acres in the woods with mountains right behind us starting at the base of the rear of the back yard. The driveway is 1510 ft (which I zigzagged for privacy) with a pond Iíd dug about half way down. Itís really beautiful and secluded here. Groceries are a 50 mile round trip.

I have a late 80ís Detroit powered Blue-Bird thatís missing one front-door glass section and the pass-side mirror. It has a drive-line noise, which is a vibration that is only present when releasing the accelerator or coasting. Anyone have a prob' like this before?
Iím surmising it a ďUĒ joint, although Iíve never as much as added fuel to a bus.
I paid $50 for it at an auction on a cold rainy day that no one decided to show up for. After speaking at length with the shop foreman (It was county owned and maintained), I drove that baby about 30 miles homeówith not a tag on it!

† After all, when was the last time you saw a bus get pulled over?


I also have (but not relevant to this board):

55í Ford F-6 dump
65í Divco milk truck
46í International rear double-wheel farm lorry
78í Fairmont
47 International retrieval (wrecker)
49í Ford ramp truck
87í Ford 40-ft. bucket truck
88í Ford ramp truck
80ís IH dump truck
49 Ford F-6 (spares)
68í Nova 2-dr
86í Ford 4WD van
85í Ford 4WD service truck
88í Ford F-250 extended cab
87 Mustang 5.0 (bought her new)
80ís Case Backhoe
76í John Deere track-loader with Hoe attachment

Everything above that wouldnít fit on my (large) ramp truck, I fixed and drove home- with the exception of the Divcoí which I had flat-bedded from New Hampshire because of a hole in the bottom of the transí case.
(PsóThereís still a 42 REO bus waiting for me there)

And Iím not going to start on our daily driversó

Now that Iíve babbled-on about me, mine, and oursólet me address what I was referring to in my query in the other post:

I was only asking in general if there is anything I should be aware of or to look out for since Iíve never had to have something towed like this before. Iím sorry I didnít include my locale, but I had no idea it was so relevant.

I have a mate who will be towing it by Fri. for $200. Iíll either follow him with my service truck, or see what he has on his rig and bring some extras.

I doubt we could get it fired in such short notice (they want it movedónot worked on) and would be afraid of the results if it wasnít prepped for the re-start. I would like to soak the cylsí for at least a couple of weeks depending on what I find with closer inspection.

The engine from what I could tell is one big black lump of grease. This may be a good thing, as it would act as an insulator from the elements.
I donít see how you can get to anything but the distributor, though. I noticed it has more than 6 plug wires-maybe double thatócould it be a dual plug set-up? Any thoughts on this?
Also is this set up on a cradle of sorts so the mechanic can just remove the whole thing to get access? Itís super-tight under there!

The tire situation will be okó
Weíll air them up and swap-out the leakers.

One issue Iím concerned about is the actual towing hook-up. If youíve viewed the pics Iíd posted on the other thread, youíll notice to large eye-bolts on the front end. I thought this had something to do with the towing. Am I wrong and what are they forópulling out of the snow?
If it takes a basic tow-sling Iím afraid it may damage the lower front valance grille. Iím sure I have to soak any bolts for weeks before they free up a bit.

One point though, Craigó
In all fairness, I did ask in my first post if anyone knew where I might get some info, parts sources and repair tips/help. Although I got two fine ďWelcome aboardís, No one spoke up with any real info. Iíd asked of any other Brill owners but nobody here seems to own one now.

I started to think I made a mistake joining here because I donít own a half-million buck Orion, GMC, or MCI.

Iím just a bottom feederóthis is my 2-bucks and change..



(PPs) If you decide to make this a sticky, just go ahead a delete this message.
And....

MIND THE GAP!† (UK lingo for watch your step when entering a coach on a platform!)

Cheers..
Logged

Mind the Gap!
DrivingMissLazy
Hero Member
*****
Offline Offline

Posts: 2634




Ignore
« Reply #8 on: June 06, 2006, 02:17:23 PM »

Nice post Brill-O. I really wish more members would post some information like that so we get a chance to know each other, even if only by computer.

You are correct in that your thread got kidnapped, as so often happens on these boards. It does however keep the board interesting, in my opinion, if it does not get carried away too far.

I strongly suspect you did not get more direct response than you did is because none of us, even us old timers, have seen few, if any, of this brand of vehicle. I believe thee only one that responded about that was Dallas and his experience was from even a much older year mode.

I can assure you that there are many of the conversions out there are not million dollar mansions or even close to that.

If you do not get a response to a question it is generally because nobody knows anything about it, or not enough initial information was provided so that a logical response could be posted. Please bear with us. We could use a few more Brits in the group.
Richard
Logged

Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body. But rather to skid in sideways, chocolate in one hand, a good Reisling in the other, body thoroughly used up, totally worn out and screaming:  WOO HOO, what a ride
Nick Badame Refrig/ACC
1989, MCI 102C3, 8V92T, HT740, 06' conversion FMCA# F-27317-S "Wife- 1969 Italian/German Style"
Global Moderator
Hero Member
*****
Offline Offline

Posts: 4890


Nick & Michelle Badame


WWW
« Reply #9 on: June 06, 2006, 06:28:55 PM »

Hello Brill-o,

It's your turn. I don't see any info on your location or about your bus in your posting Profile yet!!

If you need any info on how to do this, Ask and we will guide you.

Nick Badame-
Logged

Whatever it takes!-GITIT DONE! 
Commercial Refrigeration- Ice machines- Heating & Air/ Atlantic Custom Coach Inc.
Master Mason- Cannon Lodge #104
https://www.facebook.com/atlanticcustomcoach
www.atlanticcustomcoach.com
belfert
Guest

« Reply #10 on: June 06, 2006, 06:34:32 PM »

I started to think I made a mistake joining here because I donít own a half-million buck Orion, GMC, or MCI.

I HIGHLY doubt more than a a handful of people here have a $500,000 coach.  I paid $36,500 for my shell and I think that is probably on the high end of what most have spent on their shell.  I'm hoping to be on the road for $65 to $70k total.  (My budget has grown by some $20k since I started in April.)

Brian Elfert
Logged
gumpy
Some Assembly Required
Hero Member
*****
Offline Offline

Posts: 3353


Slightly modified 1982 MC9


WWW

Ignore
« Reply #11 on: June 06, 2006, 07:35:11 PM »

Brill-o,

First, let me clarify that I had not intention of singling you out when I started this thread. It was just that I had just read your original post, and was sitting there wishing I knew where you were located in case I could help. I didn't respond to the other thread because, like most everyone else here, I don't know anything about Brill's other than they are pretty cool. I try to keep my mouth (finger) shut when I can't add constructively to the conversation, and was hoping there would be others who would respond. But like Richard said, I really think yours is about the only one I've seen on the board. You're charting new territory and we're all watching anxiously.

I saw your pictures on the photo thread, and I must say, that is really one nice looking project bus. I only hope you document your voyage of bringing it back to life. Use it as an excuse to become more computer and internet literate. Build a website. That's what I did, and I'll help you if I can, though there are many on here who are more knowledgable about that, than I am, also.

As for being in the wrong place, don't bet on it. I think you will fit right in here with the rest of us. And, yes, I would have come to help you fix the tires and haul it if you were close by, even though I don't know you from "Adam". The reason?  Because it's obvious you're just as nuts as the rest of us.

I read your list, and was thinking, "Hey, this guy needs a John Deere tractor backhoe loader to go with all his other toys, and I just happen to have one for sale." Then I saw the case and the track-hoe.  Shoot. Smiley

Take care, and don't hesitate to post here. This is the right place, and when people can answer you question, they will.

craig


Logged

Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"
NewbeeMC9
NewbeeMC9
Hero Member
*****
Offline Offline

Posts: 1167


1981 MC9 8V71, HT 740




Ignore
« Reply #12 on: June 06, 2006, 08:53:34 PM »

Looks like your in the right place and you have a lot to offer.  If i could afford a 1/2 million bus I wouldn't be posting here or working on it myself(well maybe i would cause I'd sell it to get a cheap bus and fulltime).   I came about wanting an RV and couldn't afford what i Liked and and wouldn't have what i could afford.  The ones that i could afford needed complete rebuilding so If your gonna rebuild something  why not end up with something good.  I found a deal on mine and I'm makin payments, but there is plenty of fixing to do.  I wouldn't have attempted bring it home without this board

Welcome to the board and don't forget to use the smileycons Smiley

NewbeeMC9
Logged

It's all fun and games til someone gets hurt. Wink
Brill-o
Full Member
***
Offline Offline

Posts: 113




Ignore
« Reply #13 on: June 06, 2006, 09:02:05 PM »

Good Eveí, Gents-

Got a bit more time to waste? Read on-

This place is crazy! (In a good way!) You all seem like a pretty good bunch-

I must admit I had a laugh reading some of the replies. Again, in a good way, though.

DLM-
 Thank you for the compsí! I understand what you say completely, and I got a chuckle out of the ďhigh-jackedĒ part.

Iím only a memí of another (non-related) board and you may know when a newbie posts the first few times, folks try to feel them out so I wasnít too concerned.

Nick-
 Give isí a minute to get my bearings! I havenít even figured out how to set the clock here! Iím four hours ahead. Let me wade in and if I start treading water Iíll yelp for help. (Thank you, Sir.)

Iíll be looking how to set up the profile after Iím done bending your irisís with this post! If I can post a pic there of the Bird, Iíll do soóif not, should I post it here or on the ďBus picsĒ thread?


Belfert-
 I didnít mean to wilt your flakes, I was just generalizing (more like wishing) about the value and the convenience of owning a mega-buck ride. I meant no disrespect.
If I won the Lotto I would take a new one and re-skin it to vintage specs, keeping all the cushy stuff inside. Iím just an old sod-

 I understand when you speak of value as well-
My Bird cost the county $110,000- and they sold it to me for $50óinsane!

The closest Iíve come to spending money in your league was the purchase of a new Freightliner FL-112 with Benz power (1600 ft Lb torque/9 mpg) for 80k (with bed, air-gate and lift-axle). Since then, sold.

Good wishes with your project!


Gumpy-
Donít think you opened a can of tripe by giving me the semi-guinea pig role in your thread- Iím flattered! I was truly glad I was able to spark some interest.
Also, thanks so much for viewing the pics, and Iím pleased you (as some) think it a good looker. Itís definitely different.

 When you speak like this I get even more excited about it! I swear Iíll be loosing sleep until itís sitting in my driveway!

Iíll take photos as it goes, but I doubt I would do a web thing. I really donít have the time. Thanks very much for the help offer, though-
Go back over my vehicle list and you can see the time I have to invest just to keep them in shape much-less get to use them! Iím very time challanged-
My trak-loader will be for sale this fall.

The wrong place? Here? Another laugh!
You know I had to read a few posts before I signed on!

If I didnít think there was a least one ďsickoĒ like myself here, I wouldnít still be here defending my incorrect posting topic and not setting up my profile yet! Iím trying to be an asset and not just an @$#.

Oh, and Newbiee-
Good to read your thoughts, as well† Smiley

So all-in-all, I think you bunch are a good sort-

You blokes think you have me partly figured out, now?† † Donít bet on it!
Wait till I get back from UK--
I have my heart on getting a Saurer Komet! (Ever heard of that bus? Lovely!)

I canít wait to start a topic about that one and try and get replies!

Cheers..
and
MIND THE GAP!
Logged

Mind the Gap!
RJ
Former Giant Greenbrier Owner
Hero Member
*****
Offline Offline

Posts: 2881





Ignore
« Reply #14 on: June 06, 2006, 11:50:08 PM »


I have my heart on getting a Saurer Komet!



Heck with the Komet - engine's in the wrong place!

OTOH, If you could bring me back a fully-restored Duple Roadmaster, I'd appreciate it!   Grin

Logged

RJ Long
PD4106-2784 No More
S13406 Now
Fresno CA
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!