Bus Conversions dot Com Bulletin Board
March 30, 2015, 10:21:37 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Finally got bus on the road again!  (Read 1093 times)

« on: June 12, 2006, 04:34:02 PM »

I finally got my batteries charged up and I'm back on the road again!

Some questions though.  The book calls for approx 22 gallons coolant, but I removed the passenger baseboard radiators and the heater coil next to the evaporator.  I was able to get about 14 gallons in the surge tank before it was full.  I started the bus and no leaks so I drove it a mile or two and the tamps got to 140F or so.

What should my next steps be?  Let it cool down and refill the surge tank as necessary?

Brian Elfert
Hero Member
Offline Offline

Posts: 2458

"The Mighty GMC"

« Reply #1 on: June 12, 2006, 04:39:06 PM »


Sounds like a good plan to me.

The lines and coil could very well account for the difference.

I would probably check after the next few runs, just to be sure.


1975 GMC  P8M4905A-1160    North Central Florida

"There are basically two types of people. People who accomplish things, and people who claim to have accomplished things. The first group is less crowded."
Mark Twain

« Reply #2 on: June 12, 2006, 07:30:58 PM »

I was able to dump in about another gallon after things cooled down.  There is a neat little push button valve to release the pressure in the cooling system.

I suspect after I get it warmed up completely that I will be able to get a little more in yet.

Brian Elfert

« Reply #3 on: June 12, 2006, 08:40:39 PM »

Perhaps it air-out now….However just because it read 140° F DO NOT mean it actual coolant temperature IF air (no coolant) in gauge’s thermocouple area. Be-sure bleed out air under thermostat so coolant can touch it thermostat-bulb…so it can circulates fully to move if anymore of “pocket” of air (elsewhere) to expansion tank.

Before going on trip, drive so that coolant temperature reach 180° F & stabilize to know it ok & recheck level one more time.


Sojourn for Christ, Jerry
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!